How Australian Workplaces Can Join the Healthy Workplaces Campaign

The EU-OSHA Campaign on Healthy Workplaces gives organisations a practical way to turn occupational safety and health knowledge into visible workplace action. Its campaigns bring attention to major risks, provide communication materials and encourage employers, workers, regulators, researchers and professional networks to share solutions.

Although the programme is European, its themes have clear relevance in Australia. Psychosocial hazards, changing technology, musculoskeletal disorders, occupational cancer, ageing workforces and insecure work affect workplaces in Sydney, Melbourne, Brisbane and regional communities alike. Australian organisations can use the campaign as a framework while meeting duties under their state or territory work health and safety laws.

Understand how the campaign works

Healthy Workplaces campaigns usually run over a defined period and focus on a priority risk or occupational health challenge. EU-OSHA supports each cycle with reports, practical guides, case studies, infographics, videos, events and tools that help organisations move from awareness to prevention.

Participation is broader than placing a campaign poster in a lunchroom. Employers can use campaign messages in induction sessions, toolbox talks, consultation meetings, supervisor training and internal communications. Unions, professional bodies, educators and public authorities can contribute by sharing evidence, hosting events or adapting resources for their own sectors.

An Australian organisation does not need to be based in the European Union to learn from this material. The legal framework may differ, but the prevention principles remain useful: identify hazards, consult workers, control risks at their source, monitor whether controls work and improve them when circumstances change.

Match European resources to Australian duties

Australian employers should treat EU-OSHA resources as supporting guidance rather than a replacement for local legal advice. Work health and safety obligations differ between jurisdictions, with regulators such as SafeWork NSW, WorkSafe Victoria, WorkSafe Queensland and WorkSafe WA issuing their own codes, alerts and enforcement information.

A practical approach is to compare the campaign’s recommendations with the relevant model WHS laws, codes of practice, awards and enterprise agreements. For example, guidance on psychosocial risks can be linked to Australian requirements for managing bullying, unreasonable workloads, violence, harassment, fatigue and poor organisational design. The same process can be used for hazardous substances, manual handling and machinery safety.

Local context also matters in industries with distinctive risk profiles. A mine operating on a fly-in, fly-out roster near Perth may need to focus on fatigue, isolation and mental health. A hospitality business in Melbourne may prioritise heat, slips, aggressive behaviour and insecure scheduling. A construction project in Brisbane may need controls for high temperatures, mobile plant and subcontractor coordination.

Choose a workplace issue with evidence

The strongest involvement begins with a clear problem statement. Use incident records, worker consultations, absence data, health monitoring, near-miss reports and inspection findings to identify an issue that deserves campaign attention. The aim is to connect a broad theme with a real exposure in the workplace.

A distribution centre, for instance, might discover that workers are experiencing shoulder and lower-back strain after a change in order-picking targets. A campaign on musculoskeletal health can then support a focused project involving task redesign, adjustable equipment, realistic production targets and supervisor observation. Evidence makes the activity credible and gives the organisation a way to measure progress.

Campaign participation should also include less visible risks. Workers may report physical injuries while remaining silent about excessive demands, low control, conflict or fatigue. Anonymous surveys, confidential conversations and representative consultation can reveal psychosocial hazards that do not appear in standard incident statistics.

Useful evidence sources include the EU-OSHA reports and tools, Australian regulator publications, industry research and internal data. For additional background during staff development, organisations may consult supplementary learning material alongside authoritative workplace health and safety sources.

Build a campaign action plan

A short written plan helps transform a general theme into responsibilities, activities and outcomes. It should identify the priority hazard, the people affected, the controls to be tested, the person coordinating the work and the date for review. In a small Australian business, one manager and a health and safety representative may coordinate the work; a larger employer may create a cross-functional group.

Include workers early, especially those who perform the task or experience the hazard. Consultation should account for labour-hire workers, contractors, apprentices, casual staff, night-shift teams and people working remotely. Materials may need to be available in several languages, and meetings may need to accommodate different rosters.

A useful action plan can include:

Communication should be frequent enough to maintain interest without becoming background noise. Use pre-start meetings, digital noticeboards, payslip messages, supervisor briefings, posters and short videos according to how workers actually receive information. A campaign is more persuasive when leaders explain what will change and report progress openly.

Use digital tools and local networks

EU-OSHA’s digital resources can support organisations that lack a large internal safety team. The OiRA risk-assessment platform, for example, offers a structured way to identify hazards and plan controls in participating sectors. The OSHwiki provides accessible occupational safety and health information, while the ESENER survey and OSH Barometer offer broader evidence about workplace risk management and emerging concerns.

These resources can be used as prompts for discussion rather than as automatic compliance solutions. A risk assessment still needs to reflect the actual equipment, tasks, environment and workforce. A generic checklist cannot detect every problem in a busy café on Sydney’s transport network, a remote agricultural property in regional Victoria or a software company with staff spread across several time zones.

Australian participation can grow through local professional networks. Safety institutes, universities, unions, industry associations, regulator events and employer groups can help translate campaign themes into workshops and case studies. A business may also share an anonymised improvement project through its industry newsletter or professional conference.

Digital communication is especially useful for dispersed operations. A national retailer can give store managers a common campaign package while allowing each site to add local examples. A mining company can provide the same core message to metropolitan offices and remote camps, then collect feedback through mobile forms and worker representatives.

Make participation practical for small businesses

Small and medium-sized enterprises often face time, cost and staffing pressures. The campaign should therefore be designed around manageable improvements instead of elaborate branding. A local café might review cleaning chemicals, manual handling and customer aggression during one staff meeting. A suburban trades business might run a short inspection of ladders, vehicles, heat exposure and fatigue.

Owners and managers can select one high-priority issue, explain why it matters, introduce a small number of controls and check whether the controls are being followed. This approach is more effective than distributing a large volume of information without changing work organisation or equipment.

A practical small-business activity may involve:

Campaign materials should be adapted for Australian language and conditions. “WHS” may be more familiar locally than “OSH”, while examples should reflect heatwaves, UV exposure, long commutes, traffic, remote work and the demands of seasonal industries. Businesses should also make sure translated or accessible materials reach workers who may not regularly use email or online portals.

Connect campaign activity with prevention systems

Campaign work has lasting value when it strengthens existing safety processes. Add relevant actions to the risk register, consultation calendar, induction programme, training matrix and internal audit schedule. This prevents the campaign from ending when a particular awareness week or event is over.

Leadership behaviour is a key part of credibility. Senior managers should attend briefings, provide resources, respond to reported hazards and avoid rewarding unsafe shortcuts through unrealistic targets. Supervisors need practical training so that they can recognise early signs of fatigue, stress, manual handling problems and unsafe workarounds.

Worker representatives can help test whether a message has reached the floor. They may identify gaps between written procedures and actual practice, particularly where production pressure, staffing shortages or contractor arrangements influence behaviour. Their contribution should be treated as part of risk control, not as a communications formality.

Campaign outcomes can be reviewed through both numbers and lived experience. Track completed actions, training attendance, reported hazards, equipment changes and injury data, but also ask workers whether the job has become safer and more manageable. A reduction in reporting is not automatically a success if workers have lost confidence in the reporting process.

Share results and keep the momentum

Publicly sharing a successful activity can encourage other organisations and give workers recognition for their contribution. A useful case study explains the original risk, the people consulted, the controls introduced and the evidence gathered afterwards. It should avoid disclosing personal information and should be honest about what still needs attention.

Australian organisations can share outcomes through industry events, regulator engagement, employer associations, union networks, company websites and professional social channels. A regional manufacturer in Geelong or a healthcare provider in Adelaide may have valuable lessons for organisations with similar staffing, equipment or environmental conditions.

The campaign can also become a starting point for the next improvement cycle. New technology, extreme weather, demographic change and altered work arrangements can create fresh risks. Review the workplace after the campaign period and decide which controls should become permanent, which need refinement and which risks require a separate project.

A healthy workplace is built through ordinary decisions repeated consistently: designing safer tasks, listening to workers, providing suitable equipment, managing workloads and learning from events. EU-OSHA campaign resources can help organise those decisions around a shared message and a clear prevention goal.

Choose a relevant campaign theme, compare its guidance with Australian requirements and involve the people who understand the work firsthand. Then turn the first activity into a documented improvement, measure its effect and share the lesson with the wider workplace community.